0.5 hp pool pump with cheap price for sale. Pool pump adopts 100% copper motor. The medium temperature of swimming pool submersible pump between 5 ℃ to 50 ℃.
Feature:
- Magnificent flow rate and lift, the core energy of water circulating, 2-3m suction lift.
- Free-tool filter cover design, easy to maintenance.
- IP55 protection level, with none-leaky design.
- 100% copper wire motor, 24 hours running.
- Silicone sealing ring, cover all watering section, enhance pump sealing system.
- Engineering plastic body, pump can be effectively protected under bad weather, long service life.
- Anti rust cast-aluminum motor cover,fast heat dissipation; PPO plastic steel material impeller, resist high temperature and corrosion.
Specification:
- Model: ATO-FQS-370
- Voltage: 220V (1 or 3 phase) / 380V (3 phase)
- Frequency: 50 Hz / 60 Hz
- Power: 0.5 HP (0.37 kW)
- Hmax: 8m
- Qmax: 11 m3/h
- Port Size: 50 mm
- Threaded Connection: G 1-1/2″
- Motor: copper motor
- Medium Temperature: 5 ℃ – 50 ℃
- Protection Level: IP44
- Weight: 10 kg
- Certification: CE
Dimension (Unit: mm)
Structure:
| 01: plastic spanner | 02: lid lock ring | 03: lid | 04: O’ ring | 05: basket |
| 06: union nut | 07: union bushing | 08: O’ ring | 09: pump body | 10: O’ ring |
| 11: drain plug | 12: nut | 13: gasket | 14: screw | 15: base |
| 16: O’ ring | 17: screw | 18: diffuser | 19: impeller | 20: O’ ring |
| 21: shaft seal | 22: flange | 23: screw | 24: flange | 25: R ejection water ring |
| 26: screw | 27: motor | 28: junction box | 29: electric current safeguard |
Details
Flow Diagram:
Tips: How to Use Pool Pump?
- Before use, check whether the bolts are loose and the power cables and plugs are intact.
- In order to prevent electric shock accident, it is necessary to install leakage circuit breaker or electric shock security device and other corresponding security measures.
- The working voltage range of the pump must be +10%, -10% of the rated voltage, otherwise long-term use will make the motor coil hot, the motor service life is shortened or caused by burning. If the electric pump is far away from the power supply, the power supply line should be thickened appropriately, otherwise the voltage will be used to drop and cannot run.
- Close the power switch, make the pump idle for about 2 minutes, check the start, operation is normal, steering is correct.
