Barbed Pex Pipe Insert, Chrome, 1/2 X 1/4 In. Od

SharkBite 1/2″ Chrome Plated Barb Insertx1/4″ OD Lead-Free Needle Valve Drain Valve. This valve is used with TV 608933 Cinch Clamps and requires Cinch Tool TV 608743 or Copper Crimp Rings on Cross Link Polyethylene Pex Tubing. It has NSF listed brass inserts, ASTM F-876, ASTM F-877 to SDR-9 dimensional standards, NSF 14 & 61 for use in potable water systems, CSA B137.5 standards, NSF CL-R certified for use in hot water systems where chlorinated 140 degrees Fahrenheit hot water can be constantly re-circulated. The wetted surface of this product contacted by consumable water contains less than 1/4 of 1 percent, 0.25%, of lead by weight. It meets AB1953 California & VT S152 Vermont low lead restrictions.

• 1/2 in. Chrome Plated Barb Insert x 1/4 in. OD
• Used with TV 608933 Cinch Clamps, Need Cinch Tool TV 608743 Or Copper Crimp Rings On Cross Link Polyethylene Pex Tubing.
• After crimping you can test each fitting to well over 100 PSI.
• NSF Listed Brass Inserts, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be
• The wetted surface of this product contacted by consumable water contains less than 1/4 of 1 percent, 0.25%, of lead by weight.
• Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.

WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Specifications