This Optipure 252-20120 CTO-20 Drop-In Cartridge 20″ reduces sediment down to 0.5-microns and reduces chlorine, taste & odor at a flow rate of 3.0 gpm for 30,000-gallons.
Features:
- Improves the quality and consistency of cold and hot beverages.
- Reduces maintenance frequency and cost, and extends equipment life.
- Gradient-density depth filtration reduces dirt, rust, and other debris as small as 0.5-microns to assure clean, clear water and protect solenoids, valves and other fittings against wear and plugging.
- Activated carbon filtration makes water taste great and protects equipment against corrosive chlorine.
- High capacity cartridge extends filter system life reducing maintenance frequency.
- Generates less waste, only the drop-in cartridge is replaced. No discarding of metal or plastic quick change filters.
- Replacement cartridge cost per gallon is much less than proprietary quick-change filters.
- NSF Certified under Standard 42 as replacement cartridge in OptiPure FX Series Systems.
Specifications:
- Operating Pressure Range: 10 – 125 psi (0.7 – 8.6 bar)
- Inlet Water Temperature Range: 35˚ – 100˚F (2˚ – 38˚C)
- Chlorine, Taste and Odor Reduction Capacity: 30,000 gals. (113,550 L)
- Service Flow Rate: 3.0 gpm (8.5 lpm)
- Sediment Reduction: 0.5 microns (nominal)
Installation Tips:
- Ensure cartridge is designed to replace the existing cartridge.
- Do not exceed cartridge specifications for temperature and pressure.
- Allow 3” clearance below system for filter cartridge removal and replacement.
- No activation procedure or flushing is required for cartridge to perform as specified.
- Feed-water connection to system should be COLD only.
NOTE: Drop-in style cartridge for OptiPure FX Systems. Can be used as a retrofit cartridge with most standard 20” drop-in style housings.
